Alcohol by volume ,abv, or alc/vol


Alcohol by volume (abbreviated as ABVabv, or alc/vol) is a standard measure of how much alcohol (ethanol) is contained in a given volume of an alcoholic beverage (expressed as a volume percent).[1][2][3] It is defined as the number of millilitres (mL) of pure ethanol present in 100 mL of solution at 20 °C (68 °F). The number of millilitres of pure ethanol is the mass of the ethanol divided by its density at 20 °C, which is 0.78924 g/mL. The ABV standard is used worldwide. The International Organization of Legal Metrology has tables of density of water–ethanol mixtures at different concentrations and temperatures.
In some countries, e.g., France, alcohol by volume is often referred to as degrees Gay-Lussac (after the French chemist Joseph Louis Gay-Lussac),[4] although there is a slight difference since the Gay-Lussac convention uses the International Standard Atmosphere value for temperature,15 °C (59 °F).
Mixing two solutions of alcohol of different strengths usually causes a change in volume. Mixing pure water with a solution less than 24% by mass causes a slight increase in total volume, whereas the mixing of two solutions above 24% causes a decrease in volume.[a] The phenomenon of volume changes due to mixing dissimilar solutions is called "partial molar volume". Water and ethanol are both polar solvents. When water is added to ethanol, the smaller water molecules are attracted to the ethanol's hydroxyl group, and each molecule alters the polarity field of the other. The attraction allows for closer spacing between molecules than is usually found in non-polar mixtures.

Where does wine stand in the spectrum of alcoholic drinks? While most people assume that beer is lighter in alcohol than wine, this isn’t always the case. Let’s dispel some common misconceptions about beer vs. wine and other alcoholic drinks and see the wide variation of alcohol levels in beverages.
 
 Alcohol Content in Wine (Infographic)


BEER
·        3.5% Heineken Premium Light, Amstel Light
·        4% Guinness Black
·        4.2% Bud/Coors Light
·        4.4% Yuengling
·        4.6% Corona Extra
·        5% Coors/Budweiser/MGD/Stella Artois
·        5% Heineken
·        5.6% Sierra Nevada Pale Ale
·        8.4% Tripel Karmeliet (Belgium ale)
·        9% Dogfish Head 90 Minute IPA (Imperial IPA)
WINE
·        5-6.5% Moscato d’Asti
·        7-8% German Riesling
·        10.5-12% Most American, Austrian, and Australian Riesling
·        11.5-12.5% Lambrusco (sparkling red/rosé)
·        12-13% Most Pinot Grigio
·        12.5-13% Most Beaujolais
·        12.5-13% Most Sauvignon Blanc
·        13%-14% Most Pinot Noir and Red Bordeaux
·        13.5% – 15% Malbec
·        13-14.5%% Most Chardonnay
·        13.5-14.5% Most Cabernet Sauvignon, Sangiovese, and French Syrah
·        14 – 15% Most Shiraz and American Syrah
·        14.5% Sauternes (sweet white dessert wine)
·        14- 15.5% Most Zinfandel
·        14 – 15% Most Grenache
·        15% Muscat (sweet dessert wine)
·        15.9% Rombauer and Rancho Zabaco Zinfandel
·        16% Mollydooker Shiraz
·        17-21% Port, Madeira, Sherry, Other Fortified Dessert Wines

20% VERMOUTH

17-20% SAKE

21-35% SHOCHU

30-39% FRUIT & HERB LIQUEUR

35-46% LIQUOR
·        35-40% Gin
·        35-46% Vodka
·        40-46% Whiskey, Scotch, Rum, Tequila
55-60% CASK STRENGTH WHISKeY/SCOTCH


A glass of wine might seem more civilized than a no-name can of beer, but when it comes to acting uncivilized from boozing too much, wine will likely get you there quicker. In terms of alcohol content, the rule of thumb is that 12 ounces of beer is about equivalent to 5 ounces of wine and 1.5 ounces of liquor (the amount in a shot glass).
The standard measurement of the alcohol content of drinks is alcohol by volume (ABV), which is given as the volume of ethanol as a percent of the total volume of the drink. On average, the ABV for beer is 4.5 percent; for wine, 11.6 percent ; and for liquor, 37 percent, according to William Kerr, senior scientist at the Alcohol Research Group of the Public Health Institute.
Advertisement
The range in alcohol levels is the result of how each beverage is made. All alcoholic drinks rely on fermentation, a process in which yeast convert sugars into alcohol. Compared with beer, wine involves a longer fermentation process meaning it takes more time for the yeast to gobble up sugar in grapes and spit out alcohol. The alcohol content is limited by the yeast, which, during the fermentation of beer typically becomes inactive when alcohol levels climb above 10 percent. (For beer, yeast typically break down sugars found in starches, such as cereal grains.)
Liquor, formally known as spirits , requires an extra process to achieve its souped-up alcohol content. Following fermentation, a process called distillation separates the water from the alcohol, resulting in higher alcohol concentrations of at least 20 percent. (Typical vodka contains about 40 percent ABV.)
There are some so-called beer labels that claim much higher alcohol content than the average 4 percent to 6 percent. One example is Samuel Adams Utopias, which sells for about $100 for a 24-ounce bottle and boasts an ABV as high as 27 percent. So, what's the catch?
Several beer companies have started experimenting with ways to push the alcohol limit in their beer. For example, Scottish brewers Martin Dickie and James Watt created their limited-edition bottles of Tactical Nuclear Penguin with 32 percent ABV by freezing a 10-percent-ABV beer. They then plucked out the ice (which contained only non-alcohol ingredients), leaving behind a higher concentration of alcohol.
As technology allows brewers to blur the lines between beer, wine and spirits, wise consumers might want to keep an eye on the labels which indicate the ABV of all libations.


Нема коментара

Seo Services